Surface Protection Tub Protection:
- Tub Protection that can stay on the length of the job
- 1 gallon covers 2- 5 foot tubs, also comes in 5 gallon
- Water-based product that dries to form a latex coating over your tubs and shower basin
- Protect tubs, showers, whirlpools from bumps, scratches and burns
- Installation video on product page, click on picture
You know a tub scratch can cost anywhere from $50 to over $150. For about $15.00 dollars you can cover a 5′ tub and rest a bit easier knowing your tub is Pro-Tected.
This durable liquid mask forms a “tough latex glove” over hard-to-cover surfaces providing up to a 40 mil protection for tubs, showers, and other highly polished surfaces like porcelain, enamel, fiberglass, acrylic and glass.
How to Apply:
There are two main ways to put Pro Tect’s Tub Protection Liquid Mask on to a tub or shower basin. You can paint or roll it on or use an airless sprayer. The best, most efficent way is to use an airless sprayer that as over 2,500 psi. The Tub Protection Liquid Mask is a water-based product so no chemicals are needed to flush it out of the sprayer (borrow your painters). Really, open the 1 gallon or 5 gallon bucket, put the sprayer tub in and get to Pro-Tecting.
Now if you want to paint or roll it on there are some tricks and a “must do” to have success at Pro-Tecting your tub. First things first, please, put 2 coats on or you aren’t really protecting your tub or shower basin. You want to get the product thick and in order to do that when painting or rolling it on you have to do 2 coats. You can get it thick enough on the flat surfaces but the sides will run if you put it on too heavy. Put a light coat on and then come back when it starts to dry and put another coat on.
A short video showing you how to spray the Tub Protection Liquid Mask:
If you would like to see a more detailed video click on our youtube icon. There you will see each step to installing Pro Tect Tub Protection Liquid Mask.